Place of Origin: | Guangdong, China (Mainland) |
Brand Name: | RUIHUI |
Certification: | CE, ISO certification |
Model Number: | MAC4-600F |
Minimum Order Quantity: | 1 Set |
---|---|
Packaging Details: | Wooden Box or Vacuum Packing |
Delivery Time: | 30 work days |
Payment Terms: | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
Supply Ability: | 30 Sets Per Month |
Condition: | New | Type: | Straightener Feeder & Uncoiler |
---|---|---|---|
Use: | Sheet | Voltage: | 380V/Customized |
Power(W): | 15KW | Dimension(L*W*H): | 3630*2650*2460 |
Weight: | 7T | Certification: | CE ISO |
Warranty: | 1 Year | Material Width: | 70~600mm |
Product Name: | NC Servo Straightener Feeder | Coil Weight: | 5000kg |
Material Thickness: | 0.6~6.0mm | Color: | Customized |
High Light: | coil feeding equipment,sheet metal coil feeder |
Automatic 3 In 1 Feeder Flattening Stamping Equipment CE And ISO Certification
Adjustment of the leveling roller of the three-in-one feeder
In the actual stamping automation production process, the hardness, bending degree and other various conditions are different due to the thickness, width and material of the material used, so it is necessary to adjust the leveling amount every time.
Two handwheels are placed on the three-in-one feeder leveling wheel to adjust the leveling wheel up and down.
Three-in-one feeder leveling adjustment method:
1. Slowly turn the leveling handwheel so that the gap between the working wheels and the thickness of the material.
2. Use the jog button to send the material out once and then confirm that it is leveled.
3. When the leveling has not been completed, the handwheel will be leveled, and the rotation will be increased by half a turn each time to increase the leveling.
4. The amount of the flattening wheel on the inlet side is adjusted more, and the reduction of the flattening wheel on the outlet side is adjusted to be smaller. The standard for the amount of reduction is 20-40% of the thickness of the material on the inlet side and 0-10% of the thickness of the material on the outlet side.
5. Especially for a certain degree of bending material to make it reverse bending, it is necessary to adjust the leveling amount on the outlet side, which is effective.
Pay special attention to the leveling adjustment:
The three-in-one feeder has its own range of thickness, the standard type is 0.3-2.2mm, the middle plate type is 0.5-4.5mm, and the thick plate type is 0.6-6.0mm.
When the leveling is too large, the traces of the wheel will be on the material, or the edges of both sides will be wavy. Also, if the abnormal pressure is pressed, the flat wheel bearing shaft will be damaged, or the load on the drive unit will increase, so be careful.
2.Specification
Specification | |||||
Model | MAC4-400 | MAC4-600 | MAC4-800 | MAC4-1000 | MAC4-1300 |
Stock Width(mm) | 70~400 | 70~600 | 70~800 | 70~1000 | 70~1300 |
Stock Thickness(mm) | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 |
Max.Coil Weight(kg) | 5000 | 5000 | 7000 | 7000 | 7000 |
Max.Coil O.D.(mm) | 1400 | 1400 | 1400 | 1400 | 1400 |
Coil I.D.(mm) | 508 | 508 | 508 | 508 | 508 |
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ~500* |
Max.Line Speed(m/min) | 16~24 | 16~24 | 16~24 | 16~24 | 16~24 |
Work Roll Number(piece) | upper 4 | upper 4 | upper 4 | upper 4 | upper 4 |
down 3 | down 3 | down 3 | down 3 | down 3 | |
Feed Roll number(set) | 1 | 1 | 1 | 1 | 1 |
Main Motor | AC5.5 | AC7.5 | AC7.5 | AC11.0 | AC11.0 |
Mandrel Expansion | Hydrauilc | Hydrauilc | Hydrauilc | Hydrauilc | Hydrauilc |
Reel Motor(kw) | 2.2 | 2.2 | 3.7 | 3.7 | 3.7 |
Power(v) | 3 Phase 220V/380V/50HZ | ||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | 0.49 |
Straightening Performance | ||||||
Model | MAC4-400 | MAC4-600 | MAC4-800 | MAC4-1000 | MAC4-1300 | |
Stock Thickness (mm) | 0.6~1.3 | 400 | 600 | 800 | 1000 | 1300 |
2.0 | ||||||
2.3 | ||||||
2.5 | 1170 | |||||
2.8 | 933 | 933 | ||||
3.2 | 714 | 714 | 714 | |||
4.0 | 457 | 457 | 457 | 457 | ||
4.5 | 361 | 361 | 361 | 361 | 361 | |
5.0 | 293 | 293 | 293 | 293 | 293 | |
6.0 | 203 | 203 | 203 | 203 | 203 |
FAQ:
Q1:What kinds of machines do you have?
Service:
1. Pre-Sales Service:We have professional designers to meet the different requirement.
Contact Person: Calin Deng
Tel: 13826917409
Fax: 86-769-89296723
Phase Style Automatic Nc Servo Sheet Metal Coil Feeder Stam
High Speed Nc Servo Roll Feeder For Matel Coil Machine Pneumatic release RNC-800HA
Punching Steel Straightening Nc Servo Feeder Machine / Nc Roll Feeder
OEM CCS Nc Servo Roll Feeder and Uncoiler Straightener RNC-400F
Auto High Speed Steel Coil Feeder Machine For Continuous Multiple Project Processing
Latest High Speed Mechanical Roll Feeder / Punch Press Feeder
Precision Coil Decoiler Straightener Feeder For Metal Stamping / Stainless Steel
Uncoiler And Decoiler Straightener Press Feeding Equipment For Sheet Metal
Coil Sheet Automatic Decoiler Straightener Feeder For Press Line(MAC4-800F)